Pushbutton on Home Automation Card

M

mikemick

New member
The Home Automation card has a general purpose push-button. In the schematic, it seems the pushbutton (SW1) is connected to PA0 on the STM controller, and it is stated "PROCESSOR MAKES 1uS INTERRUPT".
I can't find information on use of the pushbutton for either command line or python.
Can you help with that please?
 
alexburcea

alexburcea

Moderator
Staff member
Hi,

The firmware and drivers to use the pushbutton is not ready, actually we did not start to work on it because of the busy scheduler.
Since you ask about it we will increase the priority. I will let you know the progress.
 
Top