I have been able to make the TRIAC outputs, LED outputs, 0-10Vdc output and the dry contacts all work in OPENPLC as I expected pretty much. The 0-10Vdc inputs are different story. I can't get them to read anything but zero. My setup has the 0-10Vdc outputs connected to inputs 6 thru 8. The jumpers are set for 0-10Vdc inputs. Below is the OPENPLC program. Using the command line MEGABAS adcrd commands to read the values I get the proper voltage readings so I think the card working properly. They track nicely but not in OPENPLC. It stays at zero. I am either missing something or something isn't working.
How do I read the analog inputs in OPENPLC?
How do I read the analog inputs in OPENPLC?