AEM's latest activity

I confirmed that the correct thermocouple type is set as well as waiting for the readings to stabilize. For the voltage readings with...

Sorry, I misinterpreted the problem I am having. I am reading the channels using "smtc <0 or 1> read <channel>". I am testing the output...

Hi, Please update your 16relind-rpi. Now, the 16relind command has all the watchdog features.

I have two thermocouple hats and both are reading Fahrenheit only on ports 5-8. How do I make sure all of the ports read in Celsius?

The resolution for the Industrial Automation card analog inputs is 12 bits but considering the full scale is 10V you will not get any...

What is the resolution for the analog input on the Industrial Automation V3 hat? I am inputting 8mv and it isn't reading anything. If...

The watchdog feature was added in the last hardware version and we did not update the drivers yet. Give us a few days and we release a...

I noticed that the 16 relay hat has a built in watchdog timer, but when I ran "16relind -h" I didn't see any commands for interacting...

Does the 24v power supply need to be grounded or can it be floating?

I have an Eight MOSFETS Version 3.1 board. I need the MOSFETS to be able to switch on and off at millisecond speed. I am wondering if...

That worked, thank you!

I have a Raspberry Pi 5 with the following 6 HATs stacked: Smart Fan, Industrial Automation V3, Eight MOSFETS, Sixteen Relays 2A/24V...